Whether you ride a Triumph Modern Classic, Cruiser, Roadster, Supersport, Adventure or Touring bike, you want a clean look that, let's face it, bulky OEM turn signals just don't convey. You could bin them, but riding without turn signals isn't the safest way to go.
Our recommendation—these minimal, clean-looking Retro Turn Signals. The smaller size and classic finishes (choose black, polished or brushed and clear, amber or smoke lenses to match your bike's style) look right and use a standard turn-signal bulb for good visibility and reliability. Bodies are die-cast aluminum, so they'll look good year after year, and thanks to our selection of adapter brackets and wiring harnesses, they also mount up easily—no hassles with wire cutters, solder and electrical tape.
- They look great on any Triumph: Modern Classic, Cruiser, Roadster, Supersport, Adventure or Touring bike
- Die-cast aluminum bodies
- All use a standard turn-signal single filament 12V 23W bulb
- 10mm mounting stem
- Amber (clear bulb)
- Smoked (clear bulb) To purchase amber bulbs click Here
Note: We recommend using Blue Loctite on the screws that attach the lens to the signal body as the screws can become loose over time and may fall out.
This part fits the following models Triumph America Carb - 2002-2008 Triumph America EFI - 2009-2016 Triumph Bonneville T100 EFI - 2009-2016 Triumph Bonneville T100 Carb - 2002-2008 Triumph Bonneville Mag - 2009-2015 Triumph Scrambler 900 EFI - 2009-2016 Triumph Scrambler Carb - 2006-2008 Triumph Thruxton 900 EFI - 2009-2016 Triumph Thruxton 900 Carb - 2004-2008 Triumph Speedmaster EFI - 2009-2016 Triumph Speedmaster Carb - 2003-2008*Refer to Description in event of VIN specific fitment
- Q & a
Are these DOT approved?A:These signals are not DOT approved.Customer Support answered on April 3, 2017Will these fit in the same spot as the stock rear turn signals on a 2010 speedmaster? do I need any adaptors?A:You would be able to adapt these turn signals into the stock location with the correct size washers which you will be able to find at your hardware store otherwise we sell the brackets which relocates your turn signals onto your struts:
http://www.british-customs.com/strut-mount-turn-signal-adaptersCustomer Support answered on July 31, 2016For a 2016 Thruxton 900 which adaptors (if any) would be needed?A:If you search this under our search, this will bring up the turn signal harness which makes everything plug n play; no soldering or crimping: BC501-009-PR
We also have the entire kit here which makes everything plug n play and very simple while changing the look of your bike : KIT-FP-RETRO-TSCustomer Support answered on September 7, 2016Will these fit in the same spot as the 2006 Scrambler's front turn signals?A:Yes, these signals can be used in the original stock signals mounting location.If you want to use a lower profile bracket you can purchase our turn signal relocation bracket which is part # BC501-030-B. We also recommend purchasing our turn signal wire harness which makes the signals plug and play. The part number is BC501-009-PR.Customer Support answered on December 1, 2016Do I need to get special mounts to put these turn signals on the front and rear of my 2014 bonne t-100 like in the photos?A:Below are part numbers which are needed and recommended to install the turn signals on the front and rear of your T100.
BC501-004Customer Support answered on July 19, 2016how many light are in a purchase?A:Great question ! This product includes two turn signals, therefore a QTY of 1 would yield a pair.Customer Support answered on July 13, 2016