BC601-012 | Installation Instructions for Triumph Street Twin Fork Brace

David Bumpus posted this on Jun 30, 2016

Fork braces improve handling in a way you never thought possible. By tightening up the front end, you'll feel a lot more confident going into corners regardless of what kind of riding you do. Installation is easy, and allow for gaiters to be used to further personalize your forks.


  • Triumph Street Twin

Tools required:

  • Phillips head screwdriver
  • 5mm Allen wrench
  • 6mm wrench

Total time the job takes:

  • 10 minutes


  • Rookie

Step 1:

Use a Phillips head screwdriver to loosen top fork gaiter bracket, and reposition to desired higher position. Retighten bracket.

Step 2:

Slide bottom of gaiters onto fork brace gaiter adapters.

Step 3:

Mount front and rear halves of fork braces into groove of fork brace gaiter adapter.

Step 4:

Use a 5mm Allen wrench to tighten inside screws.

Step 5:

Use a 6mm Allen wrench to tighten outside screws.

Step 6:

Slide gaiters back down over gaiter adapters.

Installation Complete!

Your fork brace has been successfully installed!