BC805-(002/003)-(PF/DB/TB) | Installation Instructions for Triumph Street Twin Clutch Badge
It's the little things that make a big difference. Personalizing your engine case with a clutch badge will help make your custom build pop. It's an extremely simple installation too, and takes 10 minutes even if you forgot where you left your tools. We recommend installing a BC ACG Badge with the Clutch Badge for the best results.
- Triumph Street Twin
- 4mm Allen wrench
Total time the job takes:
- 10 minutes
Use a 4mm Allen wrench to remove stock clutch badge from engine.
Use original hardware and 4mm Allen wrench to install British Customs Clutch Badge. Make sure to apply blue Loctite to screws.
Your clutch badge has been successfully installed!