Swipe to the right
How to Install Street Twin Four Bolt Risers with Spacers
Other Items We Think You May Like
Step 1:The easiest way to install the BC Four Bolt Risers is to install them on the triple clamp once it’s been removed. If you’re unsure how to do this, refer to the guide on our site’s Resource Center. NOTE: The process is the same whether the triple clamp is on or off the forks.
- Insert supplied bolt into bottom piece of Four Bolt Riser.
OPTIONAL: Put spacer on bolt if desired. Make sure that the spacer locks into the bottom of the riser.
Step 3:Put riser bolt into the hole in the triple clamp. Place washer over bolt.
- Secure Four Bolt Riser with lock nut using a 17mm wrench. Repeat steps 2-4 on the other side to complete installation.
Step 5:Reinstall triple clamp to forks.
Installation Complete!Place handlebars into new risers. Secure top piece of risers to bottom piece of risers using a 5mm Allen wrench.
Your Four Bolt Risers have been successfully installed!