BC601-012 | Installation Instructions for Triumph Street Twin Fork Brace
Fork braces improve handling in a way you never thought possible. By tightening up the front end, you'll feel a lot more confident going into corners regardless of what kind of riding you do. Installation is easy, and allow for gaiters to be used to further personalize your forks.
- Triumph Street Twin
- Phillips head screwdriver
- 5mm Allen wrench
- 6mm wrench
Total time the job takes:
- 10 minutes
Use a Phillips head screwdriver to loosen top fork gaiter bracket, and reposition to desired higher position. Retighten bracket.
Slide bottom of gaiters onto fork brace gaiter adapters.
Mount front and rear halves of fork braces into groove of fork brace gaiter adapter.
Use a 5mm Allen wrench to tighten inside screws.
Use a 6mm Allen wrench to tighten outside screws.
Slide gaiters back down over gaiter adapters.
Your fork brace has been successfully installed!