BC201-012-(B/SS-P) | Installation Instructions for Triumph Street Twin Shock Hardware Dress Up Kit

posted this on Jul 1, 2016

Cleaning up the little things makes a big difference on any bike. The British Customs Shock Hardware Dress Up Kit will make some subtle differences to the tail section of your Triumph Street Twin that will make the whole bike look much more polished. Installation is quick and easy, and requires only basic tools. It's also a great add-on to any handling or appearance weekend project.

Fitment:

  • Triumph Street Twin

Tools required:

  • 5mm Allen wrench
  • 12mm Allen wrench

Total time the job takes:

  • 10 minutes

Difficulty:

  • Beginner

Step 1

Use a 12mm wrench to remove the top stock shock bolt from right shock.

Step 2

To install finisher, reuse stock washer with supplied bolt. Thread bolt through finisher and washer.

Step 3

Apply blue Loctite to bolt and use a 5mm Allen wrench to install. Torque to 28 Nm.

Step 4

To install BC Shock Hardware Dress Up Kit on lower shock bolt, use a 12mm wrench to remove the bottom stock shock bolt from right shock.

Step 5

To install finisher, reuse stock washer with supplied bolt. Thread bolt through finisher and washer.

Step 6

Apply blue Loctite to bolt and use a 5mm Allen wrench to install. Torque to 28 Nm.

Step 7

Repeat steps 1-6 on the left side to complete installation of the Shock Hardware Dress Up Kit.

 

Note: If you’re installing the Shock Bolt Dress Up Kit with a Shock Mount License Plate, you don’t have to use the stock washer.