CM201-004-B | Installation Instructions for Ducati Scrambler Control Clamps

posted this on Jul 5, 2016


Relocating your mirrors will significnatly change your bike's character, and upgrading your control clamps to get rid of the unsightly mirror holes will keep your build looking clean. It only takes about five minutes to put the new control clamps on, and you'll be glad you did once you step back and see the difference. While you're at it, upgrading your handlebars, risers, speedo gauge mount bracket, and master cylinder cover will help completely transform your bike's front end.


  • Ducati Scramber

Parts Needed:

  • 2 Control Clamps
  • Supplied hardware

Tools Required:

  • 5 mm Allen wrench
  • 4 mm wrench

Time Required:  5 minutes

Difficulty: Beginner

Step 1

Use a 5mm Allen wrench to remove stock control clamps.

 Step 2

Place front of new control clamp over stock back control clamp. Tighten with a 4mm Allen wrench.

 Step 3

Repeat steps on other side of handlebar, and your control clamps will have been successfully installed.