The motoscope pro is the most recent generation of motogadget's digital dashboard series.
Cutting edge technology enables us to create ultra-slim casing designs. 734 LED's - governed by a 16-bit RISC processor - create an almost rimless, self-illuminating display matrix. It provides optimal readability even under conditions of direct sunlight. Automatic brightness control is a of course featured.
The rev-counter is displayed fully scalable via the analogue LED band with drag indicator function. Main and secondary display are user configurable. Another display section shows the gear currently engaged.
Four indicator lights are pre-installed and can be used for far more input signals via the Breakout Boxes. The motoscope pro is equipped with a fully-fledged CAN-bus interface and thus ready for many of tomorrow's developments like for example the plug 'n ride Breakout-Box Triumph (please see 'Triumph' Breakout Box).
The dashboard communicates over a proprietary digital one-wire bus (m-Bus) with additional Breakout Boxes to easily expand the application spectrum. This makes the dashboard highly versatile and makes applications of a wide range for vehicles and tasks possible.
The billet aluminum casing is cnc-machined and is easily mounted by two threaded holes on the back.
Please order the Breakout Box to connect indicator light signals (see Breakout Box Std.) or to connect digital bus-systems.
Scope of supply: motoscope pro with ca. 55 cm (22") connector cable, speedometer sensor M5 x 0,5 fine-pitch thread (stainless steel, IP67) with ca. 150 cm (59") connector cable, 2 magnets, 10 cable end connectors, in-line fuse, 2 stainless steel screws, detailed installation and operating instructions.
Please note: The touch sensor function has been discontinued and is not supported anymore
Specifications and Features
Length, Height, Depth: 109 mm/ 47 mm/ 11 mm
Weight w/ cable: ca. 100 g
Mounting: 2 x M3 threaded holes on back
Power consumption during operation: max. 200 mA (load dependent)
Power consumption in standby: 0.4 mA
Operating voltage: 9 V - 15 V
Operating temperature: -20°... +80°C
Feature Measuring range Rev counter (LED bargraph) 0 – 6, 8, 10, 12, 14, 16, 18 krpm (adjustable) Speedometer 0 – 350 km/h or mph Trip meter A bis 999.9 km or mi Trip meter B bis 999.9 km or mi Total mileage (adjustable) bis 250000 km or mi Operating hours/Service 0 – 9999.5 h Clock 23:59 h/min Timekeeping 0 – 99:59:59 h/min/s RPM count (on LCD) 0 – 20000 rpm Adjustable RPM warning (gear shift flash) 0 – 20000 rpm On-board voltage 9 – 18 V Low voltage warning Warning if below ca. 11V Timekeeping 0 - 100 km/h or 0 - 60 mph 0.00 – 30.59 sec. Actual accelleration +/- 0.00 – 1.50 G Average speed 0 – 350 km/h or mph Max. speed 0 – 350 km/h or mph Max. RPM 0 – 20000 rpm Max. positive acceleration +1.50 G Max. negative acceleration - 1.50 G Gear display N, gear 1 - 6 Green control LED (w/ breakoutbox A/B) Neutral (N) Green control LED (w/ breakoutbox A/B) Turn indicator left/right blue control LED (w/ breakoutbox A/B) High beam Red control LED (w/ breakoutbox A/B) Miscellanious warning funktions Fuel/Reserve (w/ breakoutbox A/B) 0 - 100% w/ low warning Air temperature* (w/ breakoutbox B) -20 - 80 °C / -4 - 176 °F w/ high/low warning Water temperature* (w/ breakoutbox B) 40 - 120 °C / 104 - 248 °F w/ high/low warning Oil temperature* (w/ breakoutbox B) 40 - 150 °C / 104 - 302 °F w/ high/low warning Oil pressure* (w/ breakoutbox B) 0 - 8 bar / 0 - 116 psi w/ high/low warning
This part fits the following models Triumph Bonneville T100 Carb - 2002-2008 Triumph Bonneville Mag - 2009-2015 Triumph Scrambler 900 EFI - 2009-2016 Triumph Scrambler Carb - 2006-2008 Triumph Thruxton 900 EFI - 2009-2016 Triumph Thruxton 900 Carb - 2004-2008*Refer to Description in event of VIN specific fitment
Write Your Own Review
- Q & a