The all-new British Customs Drag Pipes were designed for riders that run wide open. More than just a TT style set of mandrel bent stainless steel, these flat-track inspired Drag Pipes are engineered to deliver superior performance and rideability over any set of sawed-off straight pipes. Featuring an integrated louvre core design that is wrapped in stainless steel wool, our Drag Pipe system not only tunes the exhaust tone to something beefier than "semi-automatic potato gun” but maintains back pressure for roll-on performance. This means your Modern Classic won't wheeze, cough and stall in commuter traffic. We also increased the diameter of our stainless steel headers to maximize flow and integrated a cross-over pipe that balances back pressure to maintain that low-end grunt -- the fact that it makes installation an easier affair is our bonus to you.
- Straight pipe look and deep sound
- Louvered baffle core for top performance
- Stainless-steel construction for durability
- Full system replaces stock headers and mufflers
- Made in USA
NOTE: Does not fit with stock Scrambler kickstand.
This part fits the following models Triumph Bonneville T100 EFI - 2009-2016 Triumph Bonneville T100 Carb - 2002-2008 Triumph Bonneville Mag - 2009-2015 Triumph Scrambler 900 EFI - 2009-2016 Triumph Scrambler Carb - 2006-2008 Triumph Thruxton 900 EFI - 2009-2016 Triumph Thruxton 900 Carb - 2004-2008*Refer to Description in event of VIN specific fitment
Write Your Own Review
- Q & a
Does this exhaust fit the 2016 Thruxton 1200? Thanks.A:Unfortunately this exhaust system is only for the air-cooled line of Triumph Modern Classics but we do have the Drag Performance tip available here for the Thruxton 1200 : http://www.british-customs.com/drag-performance-tip-for-thruxton-r-polishedCustomer Support answered on August 7, 2016Could I get these with no finish on them? I would like to weld a bung for my autotune and then have them powder coated!A:Unfortunately we cannot offer this exhaust system without a finish but we have put you in a list as if we have a set available without a finish at any time, we will be sure to contact you.Customer Support answered on August 31, 2016Can I fit this on the 2017 Street Twin?A:Unfortunately this will not fit the Street Twin.Customer Support answered on September 15, 2016Will the "Drag Pipe Full Exhaust System" fit the new 2016 Triumph Bonneville T120 motorcycle? If not will you have performance exhaust for the T120?A:Great question ! Unfortunately this exhaust system is meant for the air-cooled twins although please be sure to keep checking or sign up for our newsletter as we are frequently releasing new products for the liquid-cooled line.Customer Support answered on July 11, 2016Will this exhaust fit a 2004 Triumph America?A:The drag exhaust is not compatible with the America/Speedmaster models. The exhaust we have available will be listed within the America or Speedmaster section.Customer Support answered on January 4, 2017how noisy are they compared to predators? i understand this question has no straight forward answer, an opinion will suffice at this stageA:They have a very different sound than the Predators. They're not quite as loud as the Predators, and have more of a vintage tone than anything else.Customer Support answered on January 12, 2017I have 2012 bonneville what all parts do I need to convert to these pipes?A:The exhaust themselves are a direct fitment. Since your bike is an EFI model you will need to eliminate the O2 sensor plugs as there are no ports in the headers to retain your stock O2 sensors. You can eliminate them with part # EL06-032.Customer Support answered on December 1, 2016Will this fit on a 2012 Speedmaster? ThanksA:Unfortunately this will not fit the Speedmaster; please see the fitment section for more info on model compatibility.
Here is the exhaust that will work with the America & Speedmaster : http://www.british-customs.com/shop/efi-cocktail-shaker-exhaust-for-america-speedmasterCustomer Support answered on July 5, 2016Only headers right? Or does this include silencer as well?A:This exhaust consists of an entire system that is ready to go with the proper tuning. It may look like straight headers but it has a feature called a louvered core at the end to provide back pressure.Customer Support answered on August 17, 2016Will these work with O2 Sensors?A:These will not work with O2 sensors. If using these on an fuel injected (EFI) bike, one of the parts you will need in order for your bike to run properly includes a Dynojet Power Commander V, which eliminates the need for O2 sensors. If you have a carbureted bike, you will not need O2 sensors. We recommend getting one of our full Drag Pipes Packages to get everything you will need in order for the bike to run properly here: https://www.british-customs.com/catalogsearch/result/?cat=0&q=drag+pipes+packageCustomer Support answered on August 29, 2016BC, will this fit a Triumph Bonneville t100 2015 model?A:Correct ! This full system will work with your 2015 T100. I would also suggest taking a look into the Drag Pipes package for EFI as it includes necessary upgrades for your T100 to run properly with the Drag Pipes installed.Customer Support answered on August 28, 2016