- Triumph Street Twin
- Jack or swingarm stand
- 1 1/6" socket wrench
- Torque wrench (for reinstalling)
Total time the job takes:
- 20 minutes
Remove rear wheel. If you aren’t sure how to do this, please refer to our guide covering how to remove your rear wheel on our site’s Resource Center.
Use a 14mm socket wrench to remove nuts securing rear sprocket to rear wheel.
Pull rear sprocket off mounts.
Place BC Rear Sprocket on mounts.
Secure BC Rear Sprocket to rear wheel with 14mm socket wrench. Apply blue Loctite and torque each nut to 55 Nm.
Your new rear sprocket has been successfully installed! If you are unsure how to reinstall your rear wheel, please refer to the guide on our site’s Resource Center.