- Triumph Bonneville
- Triumph Thruxton
- Triumph Scrambler
- Triumph America
- Triumph Speedmaster
- 4mm Allen wrench
Total time the job takes:
- 5 minutes
Loosen clutch cable by using the lock nut beside the clutch cable bracket. Pull cable out of clutch lifter arm.
Use 4mm wrench to remove stock clutch cable bracket. Use 4mm wrench to install BC Clutch Cable Bracket.
Run clutch cable through BC Clutch Cable Bracket. Reattach clutch cable to clutch arm. Tighten clutch cable using locknut to proper tension.
Congratulations! You have successfully installed your British Customs Clutch Cable Bracket!