- Triumph Bonneville
- Triumph Thruxton
- Triumph Scrambler
- 5mm Allen wrench
- 10mm wrench
Total time the job takes:
- 10 minutes
Remove the stock seat screws.
Remove the seat.
Flip the stock seat over to expose the bottom of the stock seat.
Locate the mounting tabs at the rear of the stock seat.
Use a 10mm socket to remove the bolts holding the tabs to the seat.
Remove the brackets.
Install the mounting brackets onto the new seat.
Tighten down the screws on the tabs using a 10mm socket.
Slide the seat into position.
Install the seat screws and tighten with 5mm Allen wrench.
Your seat has now been successfully installed!