- Triumph Street Twin
- Triumph Street Triple
- Triumph Speed Triple
- 1.5mm Allen wrench
- 22mm wrench
Total time the job takes:
- 5 minutes
Slide the rubber boot up to expose the mirror mount.
Use a 22mm wrench to loosen the mirror.
Turn the mirror counter clockwise with your hand and remove the mirror from the mount.
Thread the mirror hole caps into the holes left by the stock mirrors.
Slide a 1.5 mm Allen wrench through the small hole in the top of the cap and carefully tighten the cap.
Repeat steps 1 through 5 on the other mirror to complete installation.